Implementation Measurement Heavy Utilize Macrobending on Fiber optics Using Microcontroller Media

Authors

  • Taj putra Akbar as ad State Polytechnic of Malang
  • Mochammad Junus State Polytechnic of Malang
  • Yoyok Heru Prasetyo Isnomo State Polytechnic of Malang

DOI:

https://doi.org/10.33795/jartel.v12i3.317

Keywords:

Fiber optic, Bending, Measurement, Load, Microcontroller

Abstract

Fiber optics is a light-utilizing signal transmission medium and can be used in a wide variety of sensing sensors. Optical fiber has multifunctional sensing capabilities, namely strain, pressure, temperature, and acoustic signals with a high level of sensitivity. In this study, optical fiber will be used as a mass sensor by utilizing the macro bending method with microcontroller media. The data analysis carried out was compares the graph when the fiber optic is given a certain load, by the number certain windings and when bending with a certain diameter will then be made formula for measuring mass with optical fiber. Load or load mass = 0 gr, 200 gr, 400 gr, up to 10 kg with 9 turns and ¼ inch, ½ inch, 5/8 inch, ¾ inch, and 1 inch diameter hose. In this study, the results of weight measurement using an equation obtained from measuring the power loss against the load used are formed in a graph which results in the linier equation that is entered converted into a formula for finding the load which is then inputted into the android code so that it can be processed properly.

References

Dea Sakinah Hulfa, “Pengaruh Massa Beban Terhadap Intensitas Keluaran Fiber Optik Yang Dibentuk Dengan Lekukan Multi Bending Tugas,” 2017.

Iis Muliyana, “Pengembangan Sensor Ketinggian Fluida Berbasis Polymer Optical Fiber (Pof) Berbentuk Non-Bended.” Universitas Negeri Yogyakarta, Yogyakarta, 2016.

H. Prasetyo, “Analisa Rugi Daya Makrobending Serat Optik Moda Tunggal Terhadap Pengaruh Pembebanan Dengan Variasi Jumlah Lilitan Pada Diameter 3 cm,” vol. 2, no. 1, pp. 1–4, 2013.

Mochtar, “Desain Alat Ukur Rugi-Rugi Akibat Macrobending Optical Fiber Berbasis Personal Computer.Volume 2,” vol. 2, 2012.

D. H. Rini Khamimatul Ula, Regina H.Y, “Sensor Beban Berbasis Optik dengan Micro bending Fiber Optik Tipe MMSI FG050LGA,” no. 2013, pp. 51–56, 2016.

H. S. Efendioglu, “Design of a Hetero-core Smart Fiber Optic Microbend Sensor,” pp. 340–343, 2011.

C. Al Kindi, “Sensor Beban Berbasis Serat Optik Dengan Prinsip Mikrobending,” pp. 7–37, 2013.

J. A. Lagakos, N., Cole, J.H. & Bucaro, “Microbend fiber-optic sensor,” pp. 2171–2180, 1987.

O. Mandasari, E. S. Sugesti, B. S. Nugroho, F. T. Elektro, and U. Telkom, “Analisis Daya Hilang Pada Serat Optik Melengkung,” Tektrika, vol. 1, pp. 32–39, 2016.

A. W. Anggita and Harmadi, “Aplikasi Serat Optik sebagai Sensor Kekentalan Oli Mesran SAE 20W-50 Berbasis Perubahan Temperatur,” J. Fis. Unand, vol. 4, no. 3, pp. 239–246, 2015.

A. Maddu, K. Modjahidin, S. Sardy, and H. Zain, “Pengembangan Probe Sensor Kelembaban Serat Optik Dengan Cladding Gelatin,” vol. 10, no. 1, pp. 45–50, 2006.

R. Budiati, G. A. Pauzi, and Warsito, “Analisis Pengaruh Tekanan Pada Serat Optik Terhadap Sistem Transmisi Data BerbasisMikrokontroler ATMega32 Dengan Akuisisi Data Menggunakan Matlab,” J. Teor. dan Apl. Fis., vol. 04, no. 01, pp. 107–114, 2016.

R. P. Marya, Y. H. . Marya, and M. Marya, “Desain Sensor kelembapan Relatif Udara Menggunakan Fiber Optik”, Journal of Telecommunication Network, vol. 11, no. 4, pp. 214-219, Dec. 2021.

T. S. Sofyan and A. Setyawan, “Pemanfaatan Sensor Fiber Optik Untuk Pemantauan Bobot Kendaraan Berjalan,” 2015.

I. Ristika, R. Barani, S. N. Sari, J. Teknik, E. Fakultas, and T. Universitas, “Pengaruh rugi-rugi macrobending terhadap kinerja plastic optical fiber jenis step index multimode,” J. Tek. Elektro Fak. Tek. Univ. Brawijaya, no. Ld, pp. 1–6, 2013.

Y. H. Wijaya, M. N. Zakaria, and Y. H. P. Isnomo, “Rancang Bangun Sistem Rekap Nilai Mahasiswa Prodi Jaringan Telekomunikasi Digital Politeknik Negeri Malang Menggunakan Jaringan Fiber Optik Berbasis Website Jurusan Teknik Elektro, Program Studi Jaringan Telekomunikasi Digital, Politeknik Negeri Malang”, Journal of Telecommunication Network, vol. 11, no. 3, pp. 112-116, Sep. 2021.

M. A. Riswanto, M. Junus, and Y. H. P. Isnomo, “Analisis Perubahan Suhu Terhadap Panjang Gelombang Pada Media Fiber Optik Berstruktur Singlemode-Multimode”, Journal of Telecommunication Network, vol. 10, no. 3, pp. 129-135, Sep. 2020.

Downloads

Published

2022-08-12

How to Cite

[1]
T. putra Akbar as ad, M. Junus, and Y. H. P. Isnomo, “Implementation Measurement Heavy Utilize Macrobending on Fiber optics Using Microcontroller Media”, Jartel, vol. 12, no. 3, pp. 121-127, Aug. 2022.