Rancang Bangun Aplikasi Performa Jaringan Komunikasi Fiber Optic (FO) sebagai Salah Satu Media Transmisi Node B (NB) di Area Malang Berbasis Android
DOI:
https://doi.org/10.33795/jartel.v5i2.204Keywords:
Attenuatin, Fiber Optic, Link Budget, PerformanceAbstract
Fiber optic is chosen to be the backbone channel for telecommunication purposes, in this case the connection between nodes b. Therefore, to determine the performance of a fiber optic network, a fiber optic communication network performance application is required. The performance discussed in this study is total attenuation, Optical Signal to Noise Ratio (OSNR) and Bit Error Rate (BER). The method used to obtain the attenuation value along the length of the cable and the total attenuation is by measuring the fiber optic network with an Optical Time Domain Reflectometer (OTDR). After taking measurements, the data is processed to produce output in the form of network performance, namely the total attenuation value, OSNR and BER. The results of the accuracy of the two comparisons are indicated by the percentage error rate. Based on the overall data tested, a value of 5.53% was obtained for comparison between the theoretical results and the value of the measurement results and obtained a value of 5.10% for the comparison between the measurement value and the application calculation value. Then the relationship between total attenuation with OSNR and the relationship between OSNR and BER is an inverse relationship.
References
Agrawal, G. P. (2002). Fiber-Optic Communications System, Third Edition. British: John Wiley & Sons, Inc.
Antony, T., & Gumaste, A. (2003, 2 7). DWDM Network Designs and Engineering Solutions. Dipetik 2 7, 2017, dari ciscopress.com: http://www.ciscopress.com/articles/printerfriendly/30886
Anwar, R., Rosmiati, M., & Zani, T. (2015). Pembuatan Aplikasi Pengukuran Dan Analisis Loss Daya Fiber Optik Menggunakan Matlab. Jurnal Tugas Akhir, Teknik Komputer, Universitas Telkom.
Badriyah, T. (2007). Lecturer Pens. Dipetik Februari 4, 2017, dari Lecturer Pens Web site: http://tessy.lecturer.pens.ac.id/kuliah/db2/klasifikasi.pdf
Bonaventura, G. (2010). Optical Fibers, Cables and Systems. Geneva: ITU-T Manual.
Chomycz, B. (2009). Planning Fiber Optics Networks. New York: McGraw-Hill Companies, Inc.
GN Nettest. (2000). Understanding OTDRs, Part #33881 Rev. A. New York: GN Nettest.
Hakim, A. M., & Rahman, M. I. (2016). Instalasi dan Aplikasi Fiber Optic (FO) Sebagai Komunikasi Node B (NB) di Area Malang. Malang: Politeknik Negeri Malang.
Keiser, G. (2003). Optical Communication Essentials. New York: McGraw-Hill Book Co.
Kothari, C. R. (2004). Research Methodology Methods and Techniques (Ssecond ed.). New Delhi: New Age International Publishers.
Meier, R. (2012). Professional Android 4 Aplication Development. Indianapolis: John Wiley & Sons Inc.
Roychoudhuri, C. (2000). Fiber Optic Telecommunication. Dalam N. Massa, Fundamentals of Photonics (hal. 333). Springfield: University of Connecticut.
Wadhana, E. K., & Setijono, H. (2010). Analisa Redaman Serat Optik Terhadap Kinerja Sistem Komunikasi Serat Optik Menggunakan Metode Optical Link Power Budget. Jurnal Skripsi, Jurusan Teknik Fisika, Institut Teknologi Sepuluh November
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2017 Ahmad Maulana Hakim
This work is licensed under a Creative Commons Attribution 4.0 International License.
